- Home
- /
- Products
- /
- Pavement Materials
- /
- -40mm Blended Subbase
-40mm Blended Subbase
Demolished concrete, brick, roof tiles, ceramic tiles, road base and asphalt are a valuable resource material that can be suitably recycled and blended back into various construction materials. Using recycled Construction & Demolition materials in your next construction project eliminates the need for demolished C & D waste being disposed of at council land fill sites, which assists in protecting the environment from further degradation and creating a circular economy.
-40mm recycled blended subbase can be supplied to;
- RMS 3051 Ed.7 specification
Note: All results are indicative only and to standard compaction RMS T111:
- Maximum Dry Density – 1.79t/m3
- Maximum Wet Density – 2.05t/m3
- Optimum Moisture Content – 14.9%
- Particle Size Distribution – Test Method: RMS T106/T107
- California Bearing Ratio > 60%
- Plasticity index – Non Plastic
- Fractured Faces > 75%
- Misshapen 2:1 < 35%
- Maximum Dry Compressive Strength > 1.0MPa
- Wet Strength > 70kN
- Wet/Dry Strength Variation < 35%
- Acid soluble sulphate content < 0.03%
-40mm recycled blended base is an excellent road making material.
- High quality material that compacts easily
- High load bearing strength
- Impervious to water, low shrink swell properties
- Construction activities can often continue during wet conditions
- Reducing the impact on natural resources
- Working towards an ecologically sustainable future
-40mm recycled blended base has many pavement construction uses.
Some typical uses include
- Subbase layer for road pavement
- Select and structural fill material
- Base course for hardstand and carpark areas
- Base course for building pads
- Subbase layer under concrete driveways and footpaths